
Technical specifications
Scroll sideways to see all columns →
| Parameter | Value |
|---|---|
| Model | AB12-C16(8)16-L1 |
| Voltage | 220 / 380 V / 50 Hz |
| Carry-out ratio (rejection acceptance) | 8:1 |
| Sorting accuracy | 99% |
| Power | 7.5 kW |
| Air pressure | 0.55–0.8 MPa |
| Air consumption | 2.5–3.6 L/min |
| Weight | 1.5 T |
| Dimensions (L × W × H) | 4090 × 2100 × 2395 mm |
Values are the authoritative parameters from the ABM product handbook. Air consumption is given in L/min, the unit used on the specification sheets. Capacity in tonnes per hour is not published because output varies with material type, specific gravity, particle size and impurity ratio.

The brochure presents the ABM Single Layer as mineral sorting equipment for more profit; its companion plastic specification describes a removal rate above 99% for discoloured plastic flakes and other contamination.
What the ABM Single Layer (Mineral) sorts
Sensor-based sorting purifies minerals after grinding and raises the value of the output. Applications include barite and kaolin, feldspar and quartz sands, copper and lithium-bearing ore, plus recycled glass cullet and mixed copper and aluminium metal flakes. The machine is also used on power-plant slag. It accepts 1 mm to 5 cm feed, runs on 220 / 380 V at 50 Hz and works in ambient temperatures from −50 °C to +40 °C.
How it compares with the other ABM models
This model has the highest power draw of the four (7.5 kW) and the widest footprint after the Double Layer. Where the ABM Food Sorter is tuned for nuts and beans and the Double Layer for fragile berries and complicated food defects, the mineral single-layer machine is configured for ore, glass and metal flakes. All four models share 99% accuracy and an 8:1 carry-out ratio.
See the full four-model comparison table for every parameter.
Operating facts
- Sorting principle: colour difference between good product and defects.
- Material size: 1 mm to 5 cm; around 1 cm is optimal, smaller particles reduce hourly output.
- Ambient range: −50 °C to +40 °C with stable operation.
- Service: standardised plug-in modules, spares supplied with the machine, no component failure within 10 years under normal maintenance.
- Future materials: remote commissioning and online upgrades.
Industries
Mandatory pre-purchase trial
Send your actual material to our factory. We run a live sorting test, confirm the separation result and output, and only then discuss an order. We can also film the test with your own material.
Specification sheet
A downloadable full specification sheet is not published on this test site because the source handbook is a review draft. Request the current sheet by email at info@color-sorting-machine.com and we will send the release version.
采购方常问的问题
What particle size can the machine handle?
The machine accepts material from 1 mm to 5 cm. Around 1 cm gives the best overall cost-performance and sorting efficiency. Particles as small as 1 mm can be sorted, but the smaller the material, the lower the hourly output.
What is the hourly capacity in tonnes per hour?
Actual output depends on the material type, specific gravity, particle size and the share of impurities. We do not publish a single t/h figure. Send your material details to our sales team for a model recommendation and a capacity assessment for your specific feed.
Can I test the machine before buying?
Yes — and a trial is required before purchase. Send your actual material to our factory; we run a live sorting test and only proceed once the separation result and output meet your expectations.
What is the difference between single-layer and double-layer color sorters?
A single-layer sorter makes one sorting pass: it is fast to install, has low wear and suits well-graded nuts and beans. A double-layer sorter makes two sorting passes, which handles complicated discolouration, mixed foreign material and fragile products such as berries that must be moved gently. In the ABM range the single-layer ABM Food Sorter (model AB80-C42(2)-L1) weighs 690 kg, draws 5.5 kW and measures 3,800 × 1,240 × 1,740 mm, while the ABM Double Layer (model AB120-C36-16-L2) weighs 1.8 T, draws 3.5 kW and measures 4,170 × 1,940 × 2,520 mm — the double layer is the most cost-effective way to handle difficult products. Both deliver 99% sorting accuracy and an 8:1 carry-out ratio, and the compact ABM Smart (AB80-C32(2)-L1, 400 kg) covers family workshops and small plants. All values are from the ABM product handbook; if you are unsure which configuration suits your line, send us a sample and we will confirm the result with a live sorting test.
更多解答:ABM 色选机常见问题