Color Sorter FAQ

This FAQ answers twelve documented questions about ABM optical color sorters: how colour-difference sorting works, accepted material sizes, capacity assessment, spare parts, operating temperature, the mandatory pre-purchase trial and model selection.

The first seven answers come from our customer Q&A. The remaining answers come from the ABM product handbook, our application notes and the distributor programme. Where no documented figure exists — for example a t/h capacity or a certificate number — the answer says so.

Single layer versus double layer at a glance

Scroll sideways to see all columns →

Single-layer and double-layer ABM sorters
AspectSingle layerDouble layer
Sorting passesOneTwo
Typical feedWell-graded nuts, beans, garlic, glass, mineralsComplicated discolouration, foreign material, fragile berries
Example modelABM Food Sorter AB80-C42(2)-L1ABM Double Layer AB120-C36-16-L2
Power / weight5.5 kW / 690 kg3.5 kW / 1.8 T
Sorting accuracy / carry-out99% / 8:199% / 8:1

采购方常问的问题

How does an ABM color sorter separate material?

ABM color sorters work on colour difference. Any material with a visible colour difference or a colour contrast between the good product and the impurity can be identified and separated — agricultural products, industrial waste plastics, minerals and other materials alike.

What particle size can the machine handle?

The machine accepts material from 1 mm to 5 cm. Around 1 cm gives the best overall cost-performance and sorting efficiency. Particles as small as 1 mm can be sorted, but the smaller the material, the lower the hourly output.

What is the hourly capacity in tonnes per hour?

Actual output depends on the material type, specific gravity, particle size and the share of impurities. We do not publish a single t/h figure. Send your material details to our sales team for a model recommendation and a capacity assessment for your specific feed.

How easy is it to replace spare parts, and how long do they last?

All internal components are standardised plug-in modules, so a regular plant operator can replace them without specialist skills. Commonly used spare parts are supplied with the machine. From the feedback of customers already in operation, components do not fail within 10 years under normal maintenance.

Can the sorter run in very cold or very hot environments?

Yes. ABM sorters are in use in regions as cold as −50 °C and as hot as +40 °C, and continue to run stably at both ends of that range.

Can I test the machine before buying?

Yes — and a trial is required before purchase. Send your actual material to our factory; we run a live sorting test and only proceed once the separation result and output meet your expectations.

What if I change material or need new sorting parameters later?

We provide remote commissioning and online upgrades. For a new material, our technical team can change the program and tune the sorting parameters remotely, without an engineer travelling to your plant.

What is the difference between single-layer and double-layer color sorters?

A single-layer sorter makes one sorting pass: it is fast to install, has low wear and suits well-graded nuts and beans. A double-layer sorter makes two sorting passes, which handles complicated discolouration, mixed foreign material and fragile products such as berries that must be moved gently. In the ABM range the single-layer ABM Food Sorter (model AB80-C42(2)-L1) weighs 690 kg, draws 5.5 kW and measures 3,800 × 1,240 × 1,740 mm, while the ABM Double Layer (model AB120-C36-16-L2) weighs 1.8 T, draws 3.5 kW and measures 4,170 × 1,940 × 2,520 mm — the double layer is the most cost-effective way to handle difficult products. Both deliver 99% sorting accuracy and an 8:1 carry-out ratio, and the compact ABM Smart (AB80-C32(2)-L1, 400 kg) covers family workshops and small plants. All values are from the ABM product handbook; if you are unsure which configuration suits your line, send us a sample and we will confirm the result with a live sorting test.

Which ABM machine is used for mineral sorting?

Mineral applications use the ABM Single Layer (Mineral), model AB12-C16(8)16-L1 — a 1.5-tonne machine rated 7.5 kW on 220/380 V at 50 Hz, measuring 4,090 × 2,100 × 2,395 mm, with 99% sorting accuracy and an 8:1 carry-out ratio at 0.55–0.8 MPa air pressure. It is applied to barite, kaolin, feldspar, quartz and metal ores such as copper and lithium ore, and the same platform is also specified for recycled glass cullet and copper/aluminium flake sorting. Like every ABM sorter it accepts material from 1 mm to 5 cm and runs in ambient temperatures from −50 °C to +40 °C. For output figures on your specific ore, send us a sample — a live factory test with your own material is required before purchase.

Do you offer free demonstration machines and training?

Alpha Berg Industry offers a free demonstration machine and free training to applicants we consider qualified for its worldwide distributor programme. Both individuals and companies can apply.

Can you film a sorting test with my own material?

Yes. We can shoot a sorting video using the customer's own material, and the video collection shows machines working on a range of materials and industries.

How do I request a quote or a machine recommendation?

Email info@color-sorting-machine.com or call / message 0086 186-5505-3969 on phone or WhatsApp. Tell us the material, particle size and the defects you need removed; we will arrange a material test before recommending a model.

购买前先测试您的物料

把您的物料寄到工厂做实机分选测试。购买前我们会先确认分选效果与产量,也可以用您自己的物料拍摄测试视频。

WhatsApp 0086 186-5505-3969邮件 info@color-sorting-machine.com联系方式