ABM Double Layer — AB120-C36-16-L2

The ABM Double Layer is a two-pass optical color sorter for complicated discoloured and unwanted material, and for fragile products such as berries. It reaches 99% sorting accuracy with an 8:1 carry-out ratio, runs on 3.5 kW, and is the most cost-effective ABM model for difficult colour defects. Model AB120-C36-16-L2 weighs 1.8 T.

ABM Double Layer two-pass color sorter with stainless steel frame and integrated control screen
ABM Double Layer — AB120-C36-16-L2

Technical specifications

Scroll sideways to see all columns →

ABM Double Layer — technical specifications
ParameterValue
ModelAB120-C36-16-L2
Voltage220 V / 50 Hz
Carry-out ratio (rejection acceptance)8:1
Sorting accuracy99%
Power3.5 kW
Air pressure0.55–0.8 MPa
Air consumption3.6 L/min
Weight1.8 T
Dimensions (L × W × H)4170 × 1940 × 2520 mm

Values are the authoritative parameters from the ABM product handbook. Air consumption is given in L/min, the unit used on the specification sheets. Capacity in tonnes per hour is not published because output varies with material type, specific gravity, particle size and impurity ratio.

ABM Double Layer specification sheet showing the parameter table and dimension drawings
Archived specification sheet — use the parameter table above for current values

The brochure calls the ABM Double Layer the ideal, most cost-effective optical food sorter for beans and nuts with complicated discolouration and unwanted material.

What the ABM Double Layer sorts

Two sorting passes let the machine recover good product from a stream with mixed discolouration and foreign material. The Double Layer is used on beans and nuts with complicated defects, blueberries and other berries that bruise easily, rice, tea leaves and dehydrated shrimp, as well as discoloured plastic flakes in recycling. The gentle handling of fragile material is the reason berry processors choose it over a single-layer sorter. Material from 1 mm to 5 cm can be fed, with the best efficiency around 1 cm.

How it compares with the other ABM models

Against the ABM Food Sorter (single layer), the Double Layer is taller and heavier (4170 × 1940 × 2520 mm, 1.8 T versus 3800 × 1240 × 1740 mm, 690 kg) but uses less power (3.5 kW versus 5.5 kW) and adds the second pass. Against the mineral single-layer machine, it is a food- and recycling-oriented configuration rather than an ore sorter.

See the full four-model comparison table for every parameter.

Operating facts

  • Sorting principle: colour difference between good product and defects.
  • Material size: 1 mm to 5 cm; around 1 cm is optimal, smaller particles reduce hourly output.
  • Ambient range: −50 °C to +40 °C with stable operation.
  • Service: standardised plug-in modules, spares supplied with the machine, no component failure within 10 years under normal maintenance.
  • Future materials: remote commissioning and online upgrades.

Industries

Mandatory pre-purchase trial

Send your actual material to our factory. We run a live sorting test, confirm the separation result and output, and only then discuss an order. We can also film the test with your own material.

Specification sheet

A downloadable full specification sheet is not published on this test site because the source handbook is a review draft. Request the current sheet by email at info@color-sorting-machine.com and we will send the release version.

采购方常问的问题

What particle size can the machine handle?

The machine accepts material from 1 mm to 5 cm. Around 1 cm gives the best overall cost-performance and sorting efficiency. Particles as small as 1 mm can be sorted, but the smaller the material, the lower the hourly output.

What is the hourly capacity in tonnes per hour?

Actual output depends on the material type, specific gravity, particle size and the share of impurities. We do not publish a single t/h figure. Send your material details to our sales team for a model recommendation and a capacity assessment for your specific feed.

Can I test the machine before buying?

Yes — and a trial is required before purchase. Send your actual material to our factory; we run a live sorting test and only proceed once the separation result and output meet your expectations.

What is the difference between single-layer and double-layer color sorters?

A single-layer sorter makes one sorting pass: it is fast to install, has low wear and suits well-graded nuts and beans. A double-layer sorter makes two sorting passes, which handles complicated discolouration, mixed foreign material and fragile products such as berries that must be moved gently. In the ABM range the single-layer ABM Food Sorter (model AB80-C42(2)-L1) weighs 690 kg, draws 5.5 kW and measures 3,800 × 1,240 × 1,740 mm, while the ABM Double Layer (model AB120-C36-16-L2) weighs 1.8 T, draws 3.5 kW and measures 4,170 × 1,940 × 2,520 mm — the double layer is the most cost-effective way to handle difficult products. Both deliver 99% sorting accuracy and an 8:1 carry-out ratio, and the compact ABM Smart (AB80-C32(2)-L1, 400 kg) covers family workshops and small plants. All values are from the ABM product handbook; if you are unsure which configuration suits your line, send us a sample and we will confirm the result with a live sorting test.

更多解答:ABM 色选机常见问题

购买前先测试您的物料

把您的物料寄到工厂做实机分选测试。购买前我们会先确认分选效果与产量,也可以用您自己的物料拍摄测试视频。

WhatsApp 0086 186-5505-3969邮件 info@color-sorting-machine.com联系方式