ABM Smart — AB80-C32(2)-L1

The ABM Smart is the compact optical color sorter in the Alpha Berg Industry range, built for individual processors and family workshops that need straightforward operation. It separates discoloured kernels, foreign material and defects by colour difference, with 99% sorting accuracy and an 8:1 carry-out ratio. At 400 kg and 5.5 kW it is the smallest of the four ABM models.

ABM Smart color sorter, stainless steel single-chute machine with touch-screen control panel
ABM Smart — AB80-C32(2)-L1

Technical specifications

Scroll sideways to see all columns →

ABM Smart — technical specifications
ParameterValue
ModelAB80-C32(2)-L1
Voltage220 V / 50 Hz
Carry-out ratio (rejection acceptance)8:1
Sorting accuracy99%
Power5.5 kW
Air pressure0.55–0.8 MPa
Air consumption1.0 L/min
Weight400 kg
Dimensions (L × W × H)3070 × 920 × 1650 mm

Values are the authoritative parameters from the ABM product handbook. Air consumption is given in L/min, the unit used on the specification sheets. Capacity in tonnes per hour is not published because output varies with material type, specific gravity, particle size and impurity ratio.

ABM Smart specification sheet showing the parameter table and dimension drawings
Archived specification sheet — use the parameter table above for current values

The brochure positions the ABM Smart for individual and family businesses that need a handy, efficient machine.

What the ABM Smart sorts

Growers, packers and small food processors use the ABM Smart on nuts and beans such as macadamia nuts, cashew nuts, coffee beans and kidney beans, as well as garlic, chili, berries and rice. Its single-layer layout keeps installation and daily cleaning simple. It accepts material from 1 mm to 5 cm, with the best balance of output and sorting efficiency at around 1 cm; smaller particles reduce hourly throughput.

How it compares with the other ABM models

Compared with the ABM Food Sorter (single layer), the ABM Smart is lighter (400 kg versus 690 kg) and shorter (3070 mm versus 3800 mm). Compared with the ABM Double Layer, it uses one sorting pass instead of two, so it is aimed at simpler colour defects rather than complicated discoloured and foreign-material mixtures or fragile berries.

See the full four-model comparison table for every parameter.

Operating facts

  • Sorting principle: colour difference between good product and defects.
  • Material size: 1 mm to 5 cm; around 1 cm is optimal, smaller particles reduce hourly output.
  • Ambient range: −50 °C to +40 °C with stable operation.
  • Service: standardised plug-in modules, spares supplied with the machine, no component failure within 10 years under normal maintenance.
  • Future materials: remote commissioning and online upgrades.

Industries

Mandatory pre-purchase trial

Send your actual material to our factory. We run a live sorting test, confirm the separation result and output, and only then discuss an order. We can also film the test with your own material.

Specification sheet

A downloadable full specification sheet is not published on this test site because the source handbook is a review draft. Request the current sheet by email at info@color-sorting-machine.com and we will send the release version.

采购方常问的问题

What particle size can the machine handle?

The machine accepts material from 1 mm to 5 cm. Around 1 cm gives the best overall cost-performance and sorting efficiency. Particles as small as 1 mm can be sorted, but the smaller the material, the lower the hourly output.

What is the hourly capacity in tonnes per hour?

Actual output depends on the material type, specific gravity, particle size and the share of impurities. We do not publish a single t/h figure. Send your material details to our sales team for a model recommendation and a capacity assessment for your specific feed.

Can I test the machine before buying?

Yes — and a trial is required before purchase. Send your actual material to our factory; we run a live sorting test and only proceed once the separation result and output meet your expectations.

What is the difference between single-layer and double-layer color sorters?

A single-layer sorter makes one sorting pass: it is fast to install, has low wear and suits well-graded nuts and beans. A double-layer sorter makes two sorting passes, which handles complicated discolouration, mixed foreign material and fragile products such as berries that must be moved gently. In the ABM range the single-layer ABM Food Sorter (model AB80-C42(2)-L1) weighs 690 kg, draws 5.5 kW and measures 3,800 × 1,240 × 1,740 mm, while the ABM Double Layer (model AB120-C36-16-L2) weighs 1.8 T, draws 3.5 kW and measures 4,170 × 1,940 × 2,520 mm — the double layer is the most cost-effective way to handle difficult products. Both deliver 99% sorting accuracy and an 8:1 carry-out ratio, and the compact ABM Smart (AB80-C32(2)-L1, 400 kg) covers family workshops and small plants. All values are from the ABM product handbook; if you are unsure which configuration suits your line, send us a sample and we will confirm the result with a live sorting test.

更多解答:ABM 色选机常见问题

购买前先测试您的物料

把您的物料寄到工厂做实机分选测试。购买前我们会先确认分选效果与产量,也可以用您自己的物料拍摄测试视频。

WhatsApp 0086 186-5505-3969邮件 info@color-sorting-machine.com联系方式