ABM Food Sorter (Single Layer) — AB80-C42(2)-L1

The ABM Food Sorter (Single Layer) is a one-pass optical sorter for nuts, beans, garlic and chili. It delivers 99% sorting accuracy and an 8:1 carry-out ratio, and is chosen when fast installation and low wear matter more than multi-stage sorting. Model AB80-C42(2)-L1 weighs 690 kg and measures 3800 × 1240 × 1740 mm.

ABM Food Sorter single layer optical sorting machine with conveyor and stainless steel chute
ABM Food Sorter (Single Layer) — AB80-C42(2)-L1

Technical specifications

Scroll sideways to see all columns →

ABM Food Sorter (Single Layer) — technical specifications
ParameterValue
ModelAB80-C42(2)-L1
Voltage220 / 380 V / 50 Hz
Carry-out ratio (rejection acceptance)8:1
Sorting accuracy99%
Power5.5 kW
Air pressure0.55–0.8 MPa
Air consumption2.5–3.0 L/min
Weight690 kg
Dimensions (L × W × H)3800 × 1240 × 1740 mm

Values are the authoritative parameters from the ABM product handbook. Air consumption is given in L/min, the unit used on the specification sheets. Capacity in tonnes per hour is not published because output varies with material type, specific gravity, particle size and impurity ratio.

ABM Food Sorter specification sheet showing the parameter table and dimension drawings
Archived specification sheet — use the parameter table above for current values

A single-layer sorter is fast to install and is the brochure's recommendation for nuts and beans where low waste and low contamination matter.

What the ABM Food Sorter (Single Layer) sorts

A single-pass machine suits food lines with a stable, well-graded feed: nuts and beans, peeled or dehydrated garlic, and chili. All internal components are standardised plug-in modules, so a plant operator can replace a part without specialist tools; commonly used spares ship with the machine. Under normal maintenance, customers report no component failure within 10 years. The machine accepts material from 1 mm to 5 cm, optimally around 1 cm.

How it compares with the other ABM models

The ABM Food Sorter handles larger batches than the ABM Smart (690 kg versus 400 kg) and supports both 220 V and 380 V supplies. The ABM Double Layer adds a second sorting pass for complicated discolouration, foreign material and fragile berries, while this single-layer model is the faster-to-install, lower-wear option for standard nuts and beans.

See the full four-model comparison table for every parameter.

Operating facts

  • Sorting principle: colour difference between good product and defects.
  • Material size: 1 mm to 5 cm; around 1 cm is optimal, smaller particles reduce hourly output.
  • Ambient range: −50 °C to +40 °C with stable operation.
  • Service: standardised plug-in modules, spares supplied with the machine, no component failure within 10 years under normal maintenance.
  • Future materials: remote commissioning and online upgrades.

Industries

Mandatory pre-purchase trial

Send your actual material to our factory. We run a live sorting test, confirm the separation result and output, and only then discuss an order. We can also film the test with your own material.

Specification sheet

A downloadable full specification sheet is not published on this test site because the source handbook is a review draft. Request the current sheet by email at info@color-sorting-machine.com and we will send the release version.

Questions buyers ask

What particle size can the machine handle?

The machine accepts material from 1 mm to 5 cm. Around 1 cm gives the best overall cost-performance and sorting efficiency. Particles as small as 1 mm can be sorted, but the smaller the material, the lower the hourly output.

What is the hourly capacity in tonnes per hour?

Actual output depends on the material type, specific gravity, particle size and the share of impurities. We do not publish a single t/h figure. Send your material details to our sales team for a model recommendation and a capacity assessment for your specific feed.

Can I test the machine before buying?

Yes — and a trial is required before purchase. Send your actual material to our factory; we run a live sorting test and only proceed once the separation result and output meet your expectations.

What is the difference between single-layer and double-layer color sorters?

A single-layer sorter makes one sorting pass: it is fast to install, has low wear and suits well-graded nuts and beans. A double-layer sorter makes two sorting passes, which handles complicated discolouration, mixed foreign material and fragile products such as berries that must be moved gently. In the ABM range the single-layer ABM Food Sorter (model AB80-C42(2)-L1) weighs 690 kg, draws 5.5 kW and measures 3,800 × 1,240 × 1,740 mm, while the ABM Double Layer (model AB120-C36-16-L2) weighs 1.8 T, draws 3.5 kW and measures 4,170 × 1,940 × 2,520 mm — the double layer is the most cost-effective way to handle difficult products. Both deliver 99% sorting accuracy and an 8:1 carry-out ratio, and the compact ABM Smart (AB80-C32(2)-L1, 400 kg) covers family workshops and small plants. All values are from the ABM product handbook; if you are unsure which configuration suits your line, send us a sample and we will confirm the result with a live sorting test.

More answers: the full ABM color sorter FAQ.

Test your material before you buy

Send your material to our factory for a live sorting test. We confirm the separation result and output before any purchase, and can film the test with your own material.

WhatsApp 0086 186-5505-3969Email info@color-sorting-machine.comContact details

Request a Quote

Tell us your material

Factory trial with your own sample before purchase.

WhatsApp 0086 186-5505-3969
info@color-sorting-machine.com